|
|
Hello there.
We are planning to purchase some Mid-70 lidars for our project. Before that we want to verify some things.
We are going to use these lidars to scan and measure wood and load trucks from above. We must cover an area of 18 meters long and 3 meters wide. For that we are planning to put a total of 6 lidars looking down. These lidars will be at 7 meters from the ground and 3,5 meters from the object.
We want to know if the lidars work well looking down or inclined.
We also want to know, if there is any other option to cover the same area using less lidars even if it means using another lidar model?
Thank you.
|
|
Posted on 2021-5-14 15:17:16