MID-360 connect Emlid Reach M2 - GPRMC

lipisoft

Hello!

How to connect Mid-360 to Emlid Reach M2 to receive GPRMC? Livox Aviation Connector 1-to-3 Splitter Cable used.

https://docs.emlid.com/reach/reference/specifications/specs

Logic level on all digital interfaces        3.3 V
Maximum voltage on all digital pins        3.3 V

PPS - C1 or C2 port 3. pin / Function cable - Purple/white
GPRMC - S1 port 4. pin or S2 port 6. pin / Function cable - Gray/white
GND - Any port 1. pin / Function cable - Black

This is a correct setting?

Livox Support

Please take a  reference

lipisoft

Working!
Emlid Reach M2 timesync settings:
Position streaming 1 -> Serial - S1 (UART)
Baud rate: 9600
Format: NMEA
Talker ID: GP
RMC: 1 Hz

PPS - C1 port 3. pin / Function cable - Purple/white
GPRMC - S1 port 4. pin / Function cable - Gray/white
GND - C1 port 1. pin / Function cable - Black

Livox Support

lipisoft Posted at 2023-2-15 22:51
Working!
Emlid Reach M2 timesync settings:
Position streaming 1 -> Serial - S1 (UART)

And please note that mid-360 only supports time signals in GPRMC/GNRMC format.